length: 577 words 1.6 double spaced pages rating: red free how to build a computer in order to build a computer you need to have a computer case where all the components of the computer will be stored. The first type is called at case which is used for the older computers, and the second one is called atx case which is used for resent computers. The next part you need is a motherboard: all of the components of the computer plug into the motherboard. Every motherboard comes with bus speed, the higher the bus speed the faster the computer will run.

There are two types of motherboards one is made for intel cpu and the other one is for athlon cpu. Hard drive allows you to store different kinds of programs, such as games, music, typing software, etc. There is a limit to how much programs you can put on the hard drive, it all depends on the size of the hard drive. It allows to install different kinds of programs, listen to music cd’s, watch movies, and copy information from pc to cd. A modem allows you to connect to the internet, download music, and browse the internet. Network cards today are also used like a modems, which is know as dsl, cable, t1, and t3.

With out a video card the computer will not be able to display any kinds of pictures. Video cards display high quality resolution, that allows you to see a very clear and sharp images on your computer. The newest video card on the market is called agp, which stands for advanced graphic port. Sound card allows for audio playback, listen to the radio on the internet, listen to dialogs if you are watching a movie, and record mp3 files. The very first computers did not have any sound on them what so ever, but today a sound card in a computer is a must.

22 feb 2016 length: 1665 words 4.8 double spaced pages rating: red free before you start you will need to check if u need all of your pieces together and parts. If your case has a removable motherboard plate then take it out to install the motherboard on it. Now use the standoffs and install them to the case or plate where the holes lined up. These usually have pointed ends you push up through the back of the motherboard and then slide the flat head into the case or plate.

Make sure that the motherboard is not touching the case or plate on the back of the motherboard. Make sure your motherboard is tight but not too tight as to cause it to crack.next connect the power to the motherboard. The black wires have to be together in the middle or you will fry your motherboard and believe me it has happened a lot. If you have a cpu that needs the extra 12 volt hooked to the motherboard then you will need to install it also. It looks different from the other connectors and will install only the right way. You will want to allow for expandability unless you are building a small form case.

Make sure the case has at least one intake fan or a place to install one in the front. A place for an exhaust fan in the back near the middle to just below the power supply unit psu. Make sure all the cables that are suppose to come with the case are present and all the screws and motherboard standoffs are there also.here you will have to decide if you want a motherboard with everything built on the board or if you want one where you add the stuff to it.

Also you will need to decide if you want to use an intel or amd cpu.buy the best board you can. A cheap psu can cause you lots of problems as it goes up and down with supplying power to your unit. I use enermax psu myself but there are plenty of other makers of psu's out there. Since newer motherboards have the pci express slots now.remove the back case insert cover that lines up with the video slot you are using. There are agp card slots which most motherboards have used for the last few years. There are still pci video cards out and they use the pci slot and they are white in color. Place one end in the slot and then move it back and forth to insert the rest of the pins.

Take a screw from the supplies ones or if your insert was held in place with a screw use that one. If your card has a cooling fan that uses a power connection that is not on the video card hook it up and then make sure it doesn't hit the fan and that all ribbon cables and power connector wires are out of the way of the fan. Mount it as far from other devices as possible since it will generate lots of heat and it will need to have plenty of air moving around it to keep it cool.

Before installing the hard drive look at the back end of it and make sure the jumper is set to master. The instructions for setting or checking the settings will be printed on the topside of the drive. Install the ribbon cable with the end connector with the number 1 pin hole lined up with the number 1 pin on the drive.

Computer Intrusion Forensics Research Paper

The cable will be marked with a red edge or stripe to mark the side of the connector that is the number 1 pinhole. Install the other ribbon cable end connector into the primary connector on the motherboard which is usually marked ide1. If you put it in a 5.25 bay then you will need to use the adapters that came with it or the case.

Make sure to hook the cable with the pin marked number 1 edge of cable will have a red stripe to the connector with the pin marked number 1 so the pins match. The ribbon cable will be a 40 pin on and the number 1 pinhole on the connector will have the red edge or stripe. The number 1 pin on the drive unit is usually the one nearest the power connector on the drive unit. Use the end connector for the unit on the ribbon cable and the other end connector for the motherboard.

How to Build a Computer Essay Text

Computer Intrusion Forensics Research Paper

Cause And Effect Essay on School Bullying